Desert Eagle

The Desert Eagle is a large-framed gas-operated semi-automatic pistol designed by Magnum Research in the U.S., and manufactured primarily in Israel by IMI (Israel Military Industries, now Israel Weapon Industries). Manufacturing was moved to Saco Defense in the state of Maine from 1996 to 2000 which carried the XIX designation, but shifted back to Israel when Saco was acquired by General Dynamics. The Desert Eagle has been featured in roughly 500 motion pictures and TV films, considerably increasing its popularity and boosting sales.
Magnum Research has marketed various versions of the short recoil Jericho 941 pistol under the Baby Eagle name; these have no functional relationship to the Desert Eagle and bear only a moderate cosmetic resemblance.

Design details

The Desert Eagle was originally designed by Bernard C. White of Magnum Research, who filed a US patent application for a mechanism for a gas-actuated pistol in January 1983. This established the basic layout of the Desert Eagle. The Desert Eagle was originally designed as a revolver, but was later reshaped into a semi-automatic pistol. A second patent application was filed in December 1985, after the basic design had been refined by IMI for production, and this is the form that went into production.
The Desert Eagle uses a gas-operated mechanism normally found in rifles, as opposed to the short recoil or blow-back designs most commonly seen in semi-automatic pistols. Unlike most such pistols, the barrel does not move during firing. When a round is fired, gases are ported out through a small hole in the barrel near the breech. These travel forward through a small tube under the barrel, to a cylinder near the front of the barrel. The separate bolt carrier/slide has a small piston on the front that fits into this cylinder; when the gases reach the cylinder they push the piston rearward. The bolt carrier rides rearward on two rails on either side of the barrel, operating the mechanism. Its rotating bolt strongly resembles that of the M16 series of rifles, while the fixed gas cylinder/moving piston resemble those of the Ruger Mini-14 carbine (the original patent used a captive piston similar to the M14 rifle).

The advantage of the gas-operation is that it allows the use of far more powerful cartridges than traditional semi-automatic pistol designs. Thus it allows the Desert Eagle to compete in an area that had previously been dominated by magnum revolvers. Downsides of the gas operated mechanism are the large size of the Desert Eagle, and the fact that it discourages the use of unjacketed lead bullets, as lead particles sheared off during firing could clog the gas release tap, preventing proper function.
Switching a Desert Eagle to another chambering requires only that the correct barrel, bolt assembly, and magazine be installed. Thus, a conversion to fire the other cartridges can be quickly accomplished. The most popular barrel length is 6 in (152 mm), although 8, 10 and 14 in (202, 254 and 356 mm) barrels are available. The Mark XIX barrels are machined with integral scope mounting bases, making adding a pistol scope a simple operation. The rim diameter of the .50 AE is the same as the .44 Remington Magnum cartridge, consequently only a barrel and magazine change is required to convert a .44 Desert Eagle to the larger, more powerful .50 AE.
The Desert Eagle is fed with a detachable magazine. Magazine capacity is 9 rounds in .357 Magnum, 8 rounds in .44 Magnum, and 7 rounds in .50 AE. The Desert Eagle's barrel features polygonal rifling. The pistol is mainly used for hunting, target shooting, and silhouette shooting.

Variants

Mark I and VII

The Mark I, which is no longer produced, was offered with a steel, stainless steel or aluminum alloy frame and differs primarily in the size and shape of the safety levers and slide catch. The Mark VII includes an adjustable trigger (retrofittable to Mark I pistols). The Mark I and VII are both available in .357 Magnum and .44 Magnum; the Mark VII has been chambered for .41 Magnum. The barrels had a 3/8" dovetail, to which an accessory mount could be attached. Later Mark VII models were offered in .50 Action Express with a 7/8" Weaver-pattern rail on the barrel; the .50 Mark VII would later become the Mark XIX platform. Barrel lengths were 6, 8, 10 and 14 inches.

Mark XIX

The most recent model, the Mark XIX, is available in .357 Magnum, .44 Magnum, and .50 Action Express (or .50 AE). This model comes in a variety of different finishes, such as brushed chrome or titanium gold. Magnum Research offered this model in .440 Cor-bon caliber, a .50 AE derived case. Mark XIX barrels are available in 6 and 10 inch lengths only.
The DE44CA is the only XIX that is approved for dealer sales to the public in the State of California: it differs from standard XIXs in that it has a firing-pin block incorporated in its design.

Jericho/Baby Eagle

While IMI makes a cosmetically similar pistol, originally called the Jericho 941 and marketed by Magnum Research as the "Baby Eagle", the guns bear no functional equivalence: the Jericho/Baby Eagle design is a standard double action, short-recoil design derived from the CZ-75. The one functional similarity is in the IMI developed cartridges. The .41 Action Express (or .41 AE) developed for the Jericho 941 used a rebated rim, so that the pistol could switch between 9 mm Luger and .41 AE with just the change of a barrel. This is because the .41 AE was based on a shortened .41 Magnum case with the rim and extractor groove cut to the same dimensions of the 9 mm Luger. This allowed the same extractor and ejector to work with both cartridges. The .50 AE has a similar rebated rim, cut to the same dimensions as the .44 Magnum. This is what allows caliber changes between .44 Magnum and .50 AE with just the change of the barrel and magazine. Beginning January 1, 2009, KBI began importing the Jericho (using its original trade name). KBI Jericho pistols can be distinguished from earlier Jericho models by the addition of an accessory rail just forward the trigger guard. The Jericho 941's name was derived from the two cartridges it chambers, with the conversion kit.

Micro Desert Eagle

Capitalizing on the name of the Desert Eagle, Magnum Research has introduced a pistol called the "Micro Desert Eagle". It bears no resemblance to the Desert Eagle, and does not even share the barrel and ammunition swapping abilities of the Desert Eagle as yet. The only thing it shares is the gas-assisted blowback system. It is a pocket pistol, in the same class of pistols such as the Walther PPK and SIG-Sauer P230/232. It is only available in .380 ACP caliber. It is designed as a DAO (double action only) pistol with no external hammer and it is meant for personal protection in close quarters. It is manufactured in the US by Magnum Research because it weighs 14 oz. The original design is licensed from a Czech company ZVI and its Kevin pistol.

Terminal High Altitude Area Defense (THAAD)

Terminal High Altitude Area Defense (THAAD), formerly Theater High Altitude Area Defense, is a United States Army system to shoot down short, medium, and intermediate ballistic missiles in their terminal phase using a hit-to-kill approach. The missile carries no warhead but relies on the kinetic energy of the impact. THAAD was designed to hit Scuds and similar weapons, but also has a limited capability against ICBMs.
The THAAD system is being designed, built, and integrated by Lockheed Martin Space Systems acting as prime contractor. Key subcontractors include Raytheon, Boeing, Aerojet, Rocketdyne, Honeywell, BAE Systems, and MiltonCAT. Development was budgeted at over USD$700 million for 2004.
Although originally a U.S. Army program, THAAD has come under the umbrella of the Missile Defense Agency. The Navy has a similar program, the sea-based Aegis Ballistic Missile Defense System. THAAD was originally scheduled for deployment in 2012, but deployment has recently been accelerated to 2009.

Development

The THAAD missile defense concept was proposed in 1987, with a formal request for proposals submitted to industry in 1990. In September 1992, the U.S. Army selected Lockheed Martin as prime contractor for THAAD development. Prior to development of a physical prototype, the Aero-Optical Effect (AOE) software code was developed to validate the intended operational profile of Lockheed's proposed design. The first THAAD flight test occurred in April 1995, with all flight tests in the Demonstration-Validation (DEM-VAL) program phase occurring at White Sands Missile Range. The first six intercept attempts missed the target (Flights 4-9). The first successful intercepts were conducted on June 20, 1999, and August 2, 1999, against Hera missiles.

Production and deployment

THAAD Energy Management Steering maneuver, used to burn excess propellant.

Sometimes called Kinetic Kill technology, the THAAD missile destroys missiles by colliding with them, using hit-to-kill technology, like the MIM-104 Patriot PAC-3 (although the PAC-3 also contains a small explosive warhead). This is unlike the Patriot PAC-2 which carried only an explosive warhead detonated using a proximity fuse. Although the actual figures are classified, THAAD missiles have an estimated range of 125 miles (200 km), and can reach an altitude of 93 miles (150 km). The THAAD missile is manufactured at the Lockheed Martin Pike County Operations facility near Troy, Alabama. The facility performs final integration, assembly and testing of the THAAD missile.

The AN/TPY-2 radar

The THAAD Radar is an X-Band Radar developed and built by Raytheon at its Andover, Massachusetts Integrated Air Defense Facility. It is the world's largest ground/air-transportable X-Band radar. The THAAD Radar and a variant developed as a forward sensor for ICBM missile defense, the "Forward-Based X-Band - Transportable (FBX-T)" radar were assigned a common designator, AN/TPY-2, in late 2006/early 2007.

First Line Units Activated at Fort Bliss

On 28 May 2008, the U.S. Army activated Alpha Battery, 4th Air Defense Artillery Regiment, 11th Air Defense Artillery Brigade. The Unit is part of the 32nd Army Air & Missile Defense Command. It will have 24 THAAD interceptors, three THAAD launchers based on the M1120 HEMTT Load Handling System, a THAAD Fire Control and a THAAD radar. Full fielding will begin in 2009.^{[16] [17]}
On October 16, 2009, the U.S. Army and the Missile Defense Agency activated the second Terminal High Altitude Area Defense Battery, Alpha Battery, 2nd Air Defense Artillery Regiment, at Fort Bliss, Texas.

KRISS TDI-VECTOR

The TDI Vector series is a family of .45 ACP submachine guns developed by Transformational Defense Industries (TDI). They utilize asymmetrical recoil and in-line design to reduce recoil and muzzle climb.

Design

 

The Vector's patented action was originally designed by French engineer Renaud Kerbrat. This action, the so-called Kriss Super V, is an articulated mechanism which allows the block and bolt to recoil off-axis into a recess behind the weapon's magazine well. The Vector series are the first to use this action; the company claims the .45 ACP chambering was chosen to demonstrate that the action could "tame" such a powerful round.
The Vector's barrel is in line with the shooter's shoulder as in the M16 rifle and German FG42, but also in line with the shooter's hand as with many target pistols. Combined, these factors are claimed to reduce felt recoil and muzzle climb by eliminating the distance between the shooter's hand and the bore axis.

Variants

The selective fire variant is marketed as the Vector SMG, and features a 5.5 inch barrel. TDI also produces two semi-automatic versions of the Vector for sale in the US with the option of a fixed stock in states where a folding one would be prohibited. The semi-automatic carbine is called the Vector CRB/SO, with no confirmation on what the letters "CRB" stand for; they are presumed to mean "carbine." Similarly, the semi-automatic short-barrel version is labeled as Vector SBR/SO, presumed to stand for "Short BaRrel" or "Short Barrel Rifle."
TDI has announced that they also plan on adapting the system for higher-power cartridges in the future, with the company's website including plans for a 12-gauge shotgun called the MVS, and a .50 BMG heavy machine gun apparently now known as the "Disraptor" which is planned to use a double-sided, horizontal version of the Kriss mechanism.